China professional MEMS inertial measurement units supplier-Hitech Sensors Tech Co., Ltd

HTS-IMU-LP2 Inertial Measurement Unit

HTS-IMU-LP2Inertial Measurement Unit is a small, tactical grade, ten degrees of freedom inertia...

HTS-IMU-LP1 Inertial Measurement Unit

HTS-IMU-LP1 Inertial Measurement Unit is a small, tactical grade, six degrees of freedom inertial measurement unit, which is a completely inertial systems that includes a triaxial gyroscope and a triaxial accelerometer.The HTS-IMU-LP1 inertial measurement unit is housed in an aluminum package that measures approximately 47 mm × 44 mm × 14 mm and includes a standard, this tactical grade IMU is a China made alternative of ADIS16495 Inertial measurement unit.

HTS-IMU13 MEMS Inertial Measurement Unit

The HTS-IMU13 MEMS Based Inertial measurement unit is a small, tatical grade high accuracy non-GPS-aided inertial measurement unit. It consists of 3 high accurate MEMS gyroscopes, 3 high precison MEMS accelerometers and 3 inclinometers. Each axis of this IMU is factory calibrated to calibrate zero bias, sensitivity and compensate for temperature effects to ensure high accuracy. HTS-IMU13 Inertial measurement unit is a China made alternative of Sensonor STIM300.

HTS-IMU11 MEMS Inertial Measurement Unit

HTS-IMU11 MEMS Inertial Measurement Unit is composed of domestic high-precision MEMS gyro chip, high...

HTS-IMU7 MEMS Based Inertial Measurement Unit

HTS-IMU7 Micro Inertial Measurement Unit is a high peformance, affordable, non-GPS-aided inertial measurement unit. This Inertial Measurement Unit ( IMU ) uses flexible connection technology, built-in full temperature compensation, installation misalignment angle compensation, nonlinear compensation and other compensation algorithms, and can output stable and reliable measurement data for users after error compensation under static, dynamic and harsh conditions.

HTS-IMU6 Inertial Measurement Unit

HTS-IMU6 inertial measurement unit is a China-made alternative of Honeywell HG4930 series, it has an excellent MEMS gyroscope performance (bias repeatability 0.1 °/h) and an accelerometer zero bias repeatability of less than 0.1 mg. Compared with higher cost and heavier FOG-based inertial measurment systems, it is a reliable and cost-effective inertial measurement unit.

HTS-IMU4 Inertial measurement unit

The HTS-IMU4 Inertial measurement unit is a small, high accuracy non-GPS-aided inertial measurement unit. It consists of 3 high accurate MEMS gyroscopes, 3 high precison MEMS accelerometers and 3 inclinometers. Each axis of this IMU is factory calibrated to calibrate zero bias, sensitivity and compensate for temperature effects to ensure high accuracy. HTS-IMU4 Inertial measurement unit is not only an alternative of Sensonor STIM300, but also has a better accuracy and performance than them.

We are good at what others can't do